Corner: Duct, Tray, Trench
In the picture the first end of the segment is at the bottom-left.
Catalog DBF Field | Descriptive Field Name | Description |
---|---|---|
CLASS | CLASS | Must be set to DUCTCNR, TRAYCNR, or TRENCHCNR. |
HEIGHT | HEIGHT | The height of the corner. |
WIDTH | WIDTH | The width of the corner. |
BNDRADIUS | BEND RADIUS | The radius to the inside edge of the corner. |
CNRANGLE | CORNER ANGLE | The inside angle of the corner = ( 180° - deviation from straight ). e.g. "150" for a corner that deviates 30° from straight. |
HEIGHT2 | BASE THICKNESS | The thickness of the base to the inner cavity. |
WIDTH2 | SIDE WALL THICKNESS | The thickness of each wall to the inner cavity. |
LENGTH1 | EXTENSION 1 | Straight extension at the first end. |
LENGTH2 | EXTENSION 2 | Straight extension at the second end. |
LENGTH5 | UNTRIMMED CNRANGLE | The original inside angle of the segment before trimming to the required angle. This value is set from the CNRANGLE field of the catalog item when it is inserted. This field should be empty in a catalog record. |