Placement Keyboard Shortcuts
Movement Keys
The keys described below will move the component along the appropriate axis by the current snap size:
X | Move the component along the X-axis of the UCS. |
Y | Move the component along the Y-axis of the UCS. |
Z | Move the component along the Z-axis of the UCS. |
Orientation Keys
The keys described below will rotate the component about the appropriate axis by 5 degrees if ORTHO is OFF and 90 degrees if ORTHO is ON:
A | Rotate around the X- axis of the UCS. |
S | Rotate around the Y- axis of the UCS. |
D | Rotate around the Z- axis of the UCS. |
SHIFT | Switches the direction of movement and rotation keys. |
E | Cycles though the connectable ends when placing a route segment. |
R | Reset all rotations and offsets to zero. |